Publications

The adoption of Phase Change Materials (PCMs) in glazing systems was proposed to increase the heat capacity of the fenestration, being some PCMs partially transparent to visible radiation. The aim of the PCM glazing concept was to let (part) of the visible spectrum of the solar radiation enter the indoor environment, providing daylighting, while absorbing (the largest part of) the infrared radiation. In this paper, the influence of the PCM glazing configuration is investigated by means of numerical simulations carried out with a validated numerical model. Various triple glazing configurations, where one of the two cavities is filled with a…

Monodisperse hollow silica nanospheres have been prepared by using a polystyrene nanosphere template-assistant approach and their potential as antireflection (AR) coatings for window applications has been discussed. The as-prepared hollow silica nanospheres have a typical inner diameter of 200 nm and a shell thickness of 15–20 nm. The AR effect over the ultraviolet-visible-near infrared spectral region has been observed for the hollow silica nanospheres, with a minimized reflection of about 5.2 % at 500 nm, compared to 8.5 % of a plain float glass substrate. By modifying the structural features of the hollow silica nanospheres, their AR properties can be…

The comfort and energy demand of a building are influenced significantly by glazed area of the facade. The glazed areas in the building are always challenging. Large glazing allows more daylight to get into the room but at the same time cause more heat gain and heat loss through the building envelop. Shading devices are very suitable elements for installing PV panels. The aim of this study is to evaluate the potential impact of different PV shading devices on energy performance and daylight of office buildings in Nordic climate. This dissertation is based on literature studies of relevant books and…

The application of manufactured nanomaterials provides not only advantages resulting from their unique properties but also disadvantages derived from the high energy use and CO2 burden related to their manufacture, operation, and disposal. It is therefore important to understand the trade-offs of process economics of nanomaterial production and their associated environmental footprints in order to strengthen the existing advantages while counteracting disadvantages. This work reports the synthesis, characterization, and life cycle assessment (LCA) of a new type of superinsulating materials, nano insulation materials (NIMs), which are made of hollow silica nanospheres (HSNSs) and have great flexibility in modifying their properties by…

Her kommer det 800 miljøboliger
Publication Year: 2013

Miljøvernminister Bård Vegar solhjell ga grønt lys for miljøprosjekt på Ådland tirsdag.

Powerhouse One og Kjørbo
Authors: Publication Year: 2012


Energikonsept for Powerhouse One
Authors: Publication Year: 2012


Powerhouse
Authors: Publication Year: 2012


Zero Emission Buildings
Authors: Publication Year: 2009


Powerhouse One i Trondheim
Authors: Publication Year: 2011


Nullutslipp og arkitektur
Authors: Publication Year: 2009


Forskningssenteret ZEB
Authors: Publication Year: 2009


Zero Emission Buildings
Authors: Publication Year: 2009


The main purpose of this book, Hygrothermal, Building Pathology and Durability, is to provide a collection of recent research works to contribute to the systematization and dissemination of knowledge related to construction pathology, hygrothermal behaviour of buildings, durability and diagnostic techniques and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of building physics and hygrothermal behaviour, durability approach for historical and old buildings and building pathology vs. durability. The book is divided in several chapters that are a resume of the current state of knowledge for benefit of…

Miljøverndepartementet har bestemt seg etter fylkesmannens klage.

Thermal conductivity of TiO2 nanotubes prepared from a NaOH treatment of TiO2 particles with subsequent acid washing and annealing has been investigated. The obtained TiO2 nanotubes have a tetragonal anatase structure, and have a typical inner diameter of about 4-5 nm, wall thickness of about 2-3 nm, and length up to several hundred nanometers. TiO2 nanotubes show a significantly reduced thermal conductivity of about 0.40-0.84 W/(m·K) (average 0.62 W/(m.K)) at room temperature, as compared to about 8.5 W/(m·K) for the bulk TiO2 materials. The great suppression in thermal conductivity can be understood by means of increased phonon-boundary scattering and enhanced…

Wood stoves are attractive for the space-heating (SH) of passive houses. Nevertheless, there are still questions about their integration. Firstly, the power oversizing of the current stoves and their long operating time may lead to unacceptable overheating. Secondly, it is also unclear how one stove can ensure the thermal comfort in the entire building. The paper investigates these aspects using detailed dynamic simulations (TRNSYS) applied to a detached house in Belgium. An 8 kW stove is assumed to be representative of the lowest available powers in the market. Results confirm that a large power modulation is important to prevent overheating.…

Zero Emission Buildings
Authors: Publication Year: 2009


Search our website

Sort publications by:

Ascending order

Filter Publications: