Abstract

A crucial property for double-glazed sealed insulating window panes is to maintain their thermal insulating properties and thus low U-values. However, degradation and thus subsequent reduction or loss of low-conductance gas concentration may occur in the sealed glazing units by their exposure to outdoor climate.

The choice of spacers is important to keep as low thermal transport through the window panes as possible, i.e. low U-value. In addition, the type of spacers may also influence their durability and resistance towards ageing, which hence may be characterized by the low-conductance noble gas concentration, e.g. argon, krypton or xenon. Ageing and degradation of window panes may lead to a decreased or total loss of noble gas concentration and hence subsequent increased heating energy demand in buildings.

Thus, several double-glazed sealed insulating window panes, with aluminium spacers and Super Spacers, have been subjected to accelerated ageing by climate ageing and elevated temperature ageing. The durability and ageing of the sealed window panes have been studied and characterized by their spacer type and gas concentration. Furthermore, the decrease of gas concentration in sealed insulating window panes and the impact on the energy performance and in particular heating demand of buildings have been investigated.

Published in Journal papers

Abstract

There is an increasing interest in development of coupled multi-layer window structures. This is to optimize thermal properties and to develop systems with a better climate protected solar shading system. The risk of condensation on the inside of the exterior glass layer in a multi-layer window structure might be a challenge and is often questioned. The risk of condensation will depend on both window properties and indoor and outdoor climate conditions. The air gap between the inner and outer part have to be ventilated with outdoor air to give the window a "drying out" capacity. The U-value of the window and the moisture condition in the air gap both depend on the ventilation of the air gap. Reducing the ventilation improves the U-value, but increases the time of desiccation.Net long-wave radiation from the glass surface to the atmosphere during cloudless night-time will cause exterior glass temperatures lower than the outdoor air temperature, and hence increase the risk of condensation on both sides of the exterior glass. The aim of this work has been to assess for which climate conditions there will be a risk of condensation on the exterior glass layer and what might be the optimal ventilation of the outermost air gap. Simulations of the temperature on the exterior surface of the glazing including the long-wave radiation during night-time have been done and compared to measurements. An assessment has been made studying the risk of condensation and the drying out rate for climate conditions for two locations in Germany. A spreadsheet-based model calculating the U-value of a multilayer glazing unit according to ISO 15099 [1] has been further developed including airflow from exterior openings through the air gap.

Published in Conference papers

Abstract

Shading systems are widely used, also in Nordic climates, in conjunction with glazed facade in office buildings. The primary functions of the solar shading devices are to control solar gains leading to cooling needs during operational hours and reduction of discomfort caused by glare. A secondary property of shading devices incorporated in glazing units is that they can be utilized as an additional layer in the glazing unit when the shading device is deployed. This can improve the thermal transmittance value (U-value) of the windows. It can be deployed during night-time or in periods when a blocked view does not have any consequences for the users of the building. This article presents hot-box measurements of thermal transmittance values (U-values) performed for three insulated glazing units with integrated in-between pane shading systems. The shading devices are venetian-type blinds with horizontal aluminum slats. The windows with double- and triple-pane glazing units have motorized blinds. The window with a 4-pane glazing has a manually operated blind placed in an external coupled cavity.

The measurements are compared to numerical simulations using the WINDOW and THERM simulation tools. The results showed that only minor reductions of U-values of the glazing units were obtained as function of shading system operation. It was, however, found that the introduction of shading devices in the window cavities will increase the total U-value of the window due to thermal bridging effects caused by shading device motor and the aluminium slats of the blinds. coupled cavity.

Published in Journal papers

The main purpose of this book, Hygrothermal, Building Pathology and Durability, is to provide a collection of recent research works to contribute to the systematization and dissemination of knowledge related to construction pathology, hygrothermal behaviour of buildings, durability and diagnostic techniques and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of building physics and hygrothermal behaviour, durability approach for historical and old buildings and building pathology vs. durability. The book is divided in several chapters that are a resume of the current state of knowledge for benefit of professional colleagues, scientists, students, practitioners, lecturers and other interested parties to network.

Published in Books

Denne rapporten begrenser seg til å presentere en metode for beregning av kuldebroverdier for tilslutningen mellom yttervegg og golv på grunn (ringmursløsninger). I både NS 3031 og NS‐EN ISO 10211 åpnes det for en forenklet beregning av kuldebroverdien etter en annen internasjonal standard; NS‐EN ISO 13370. Denne beskriver en forenklet prosedyre for beregning av U‐verdien til golv mot grunn basert på en korreksjon til U‐verdier beregnet etter NS‐EN ISO 6946.

Published in Reports

Search our website

Sort publications by:

Ascending order

Filter Publications: