Publications

This paper is based on a review of research that describes user experiences with different types of energy efficient buildings, focusing on indoor climate, technical operation, user attitudes, and general satisfaction. Energy efficient buildings are often rated better than conventional buildings on indoor climate, but when investigating more thoroughly, the users have different concerns. The varying results from the user evaluations reflect that the quality of the buildings differs. However, user concerns may also be a result of inappropriate use. Perceived personal control and sufficient information on operation and use is crucial for an overall positive experience of the building.…

Phase change materials (PCMs) have opened a new door towards the renewable energy future due to their effective thermal energy storage capabilities. Several products have recently found their way to the market, using various types of PCMs. This paper focuses on one particular wall-board product, integrated in a well-insulated wall constructed of an interior gypsum board, PCM layer, vapor barrier, mineral wool, and a wind barrier. The wall is tested with and without the PCM layer in order to get comparative results. Experiments are conducted in a traditional guarded hot box. The hot box is composed of two full-scale test…

Master i energi og miljø

The building enclosure plays a relevant role in the management of the energy flows in buildings and in the exploitation of the solar energy at building scale. An optimized configuration of the façade can contribute to reduce the total energy demand of the building. Traditionally, the search for the optimal façade configuration is obtained by analyzing the heating demand and/or the cooling demand only, while the implication of the façade configuration on the energy demand for artificial lighting is often not considered, especially during the first stage of the design process. A global approach (i.e. including heating, cooling and artificial…

Experience with low-energy and passive house buildings forms the basis for the further development of zero-emission buildings. A post-occupancy evaluation of the Løvåshagen cooperative is therefore conducted by means of user surveys and measurement of indoor climate parameters, energy use and window opening time. The goal of the post-occupancy evaluation is to obtain information about how occupants use and experience low-energy and passive house dwellings, especially with regard to heating and ventilation. In addition, the impact of user behavior on the indoor climate and energy use will be assessed. In this paper, the results of the user survey regarding user…

The demands for both thermal comfort and reduced energy consumption in buildings have become a major driving force for the increased use of advanced building automation and control systems (BACS). In the on-going development of Zero Emission Buildings (ZEBs), it seems to be a common understanding that such systems are needed in order to save energy and reach the zero emission goals, and that energy consumption for their operation is negligible compared to the building needs and the energy saving potential BACS causes. However, sensors and actuators in automation and control systems require electricity to operate, and both the environmental…

Transparent façades are often used to increase the aesthetic value of the building and to provide visual contact with the outdoor. However, together with several positive features, it should be mentioned that glass façades may reduce the quality of the indoor thermal environment, causing thermal discomfort especially due to overheating in the summer season. The aim of this paper is to compare the implications on thermal comfort of different glazed façades, whose surface temperatures have been monitored during several experimental campaigns. The analyzed glazing systems were double skin façades and non conventional single skin façades integrating different materials (i.e. phase…

In order to reach the goal of a zero emission building (ZEB), CO2 emission data has to be made available and verified for traditional building materials, new ‘state-of-the-art’ building materials and the active elements used to produce renewable energy. However, an initial literature review found that although there are databases of embodied carbon values for most building materials, the range in results for some materials are varied and inconsistent. This paper follows on from previous work on the development of a transparent and robust method to calculate CO2eq emissions of the materials used in the concept analysis of the ZEB…

I ZEB, og som en del av arbeidspakke 5 "Konsepter og strategier for nullutslippsbygg", er det gjennomført en studie av to energikonsepter for boligområdet Ådland i Bergen. Ådland ligger ved Flesland rett sør for Bergen sentrum. ByBo AS ønsker å bygge ut fra 500 – 800 boliger på området hvor både de enkelte boligene og området som helhet skal oppfylle kriterier for nullutslippsbygg. I ZEB er det definert ulike ambisjonsnivå for nullutslippsbygg. Den gjennomførte studien anbefaler et ambisjonsnivå ZEB-O som et gjennomsnitt for Ådland området. ZEB-O betyr at området skal være selvforsynt med energi, inklusive elektrisitet og varme, over et…

The main definition of a Powerhouse is a building that shall produce at least the same amount of energy from on-site renewables as the energy used during construction, manufacturering of materials, renovation, demolition and operation exclusive energy used during manufacturering of equipment such as PCs, coffee machines etc. In addition the exported energy shall in average not have less quality than the imported energy. This implies that produced and exported electricity can offset corresponding amount of imported energy for both electricity and thermal purposes, while produced and exported thermal energy cannot offset imported electricity. The building shall also as a…


Search our website

Sort publications by:

Ascending order

Filter Publications: